Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 247
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
To create a start-up archive for the prototype machine, proceed as follows:
+
Note
If you choose USB as the target directory, do not remove the USB stick during the data saving.
Commissioning Manual
01/2017
1.
Specify the properties of the archive as required:
2.
Press this softkey to open the window for saving the archive file. You must select a directory
in this window. The default name of the data archive is "arc_startup.arc". You can use your
desired name for it. The file name extension ".arc" must be entered.
Note that you can press this key on the PPU to toggle between the file name input field and
the directory selection area.
3.
Press this key to open the selected directory.
4.
Press this softkey to create the archive.
5.
After the archive is created successfully, press this softkey to finish commissioning the pro-
totype machine and return to the main screen of the wizard.
6.
Select the system data operating area.
7.
Press this softkey to save data.
8.
Press this softkey to complete the operation.
247
Advertisement
Table of Contents
