Deactivating The Cnc Lock Function - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

Importing the activation file
The new activation file must be imported into the control system to extend the CNC lock function. The machine manufacturer
can import the new activation file directly or send the file to the end user who transfers the file to the control system. For
more information about how to import the activation file, see Section "Importing the activation file (Page 292)".
If no error occurs when importing the activation file, the CNC lock function with the new lock date is active in the control
system. You can find the extended lock date being displayed on the HMI screen, for example:
Note
If an error occurs when importing the activation file, an error-specific alarm will be issued. The state of the CNC lock function
remains unchanged.
13.8.5

Deactivating the CNC lock function

To deactivate the CNC lock function, the machine manufacturer must use the AMM tool to create a deactivation file without
lock date.
Creating the deactivation file
Proceed through the following steps to create the deactivation file:
1.
2.
3.
294
Start Access MyMachine on your computer.
Select the following menu command:
Click this button in the displayed dialog box to proceed to the next step.
Commissioning Manual
01/2017