Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 164

Structure of subroutines
PLC sample subroutines offer PLC functions for the machine tool.
Subroutine No. Name
0 to 19 -
20 AUX_MCP
21 AUX_LAMP
22 AUX_SAFE_DOOR
23 AUX_CHIP
24 AUX_3Color_LAMP
31 PLC_ini_USR_INI
32 PLC_INI
33 EMG_STOP
37 MCP_NCK
38 MCP_Tool_Nr
39 HANDWHL
40 AXIS_CTL
41 MINI_HHU
42 SPINDLE
43 MEAS_JOG
44 COOLING
45 LUBRICATE
46 PI_SERVICE
47 PLC_Select_PP
48 ServPlan
49 Gear_Chg1_Auto
50 Gear_Chg2_Virtual
51 Turret1_HED_T
52 Turret2_BIN_T
53 Turret3_CODE_T
54 Turret2_3_ToolDir
55 Tail_stock_T
56 Lock_unlock_T
58 MM_MAIN
59 MM_MCP_808D
60 Disk_MGZ_M
62 Trg_key_OR
63 TOGGLE
34-36/57/61 -
164
Description
Reserved
Auxiliary function
Working lamp control, called in the subroutine "AUX_MCP"
Safety door control, called in the subroutine "AUX_MCP" for a milling
application
Chip conveyor control, called in the subroutine "AUX_MCP" for a
milling application
Three-color lamp control, called in the subroutine "AUX_MCP"
Reserved for initialization functions of the manufacturer (this subrou-
tine is automatically called by subroutine 32)
PLC initialization, executed at the first PLC cycle (SM0.1)
Emergency Stop
Signals from the MCP and HMI are sent to NCK interfaces
Display tool numbers via the 7-segment LED of the MCP
Handwheel selection via the HMI
Control of feed axis enable and spindle enable
Handwheel on hand-held unit
Spindle control, including the spindle braking function
Tool measurement in JOG mode
Coolant control (Manual Machine key and M code: M07, M08, M09)
Lubrication control (interval and time)
ASUP (Asynchronous Subroutine Program)
PLC selects a subroutine
Service planner
Automatic gear change of the spindle
Virtual gear change of the spindle
Turret control for turning machine (turret type: Hall element transistor,
4/6 position)
Turret control for turning machine (turret type: position detection with
encodings)
Hydraulic turret control for turning machine (turret type: position de-
tection with encodings)
Evaluate tool direction and calculate tool position (called by Tur-
ret2_BIN_T, Turret3_CODE_T)
Tailstock control for turning machine
Clamp or release control for turning machine
Manual machine
Spindle signal processing for the manual machine
Disk tool magazine for a milling machine
Spindle override, feedrate override, and rapid feedrate control for a
turning application
Spindle override control for a milling application
Six key-operated switches: K1 to K6
Two delay switches: K7, K8
Reserved
Commissioning Manual
01/2017