③
Activates the modified values
④
Resets the value of the selected parameter to default
Setting parameters
No.
Name
36100
POS_LIMIT_MINUS
36110
POS_LIMIT_PLUS
7.6.2
Setting backlash compensation data
In the case of axes/spindle with indirect measuring systems, mechanical backlash results in corruption of the traverse path,
causing an axis, for example, to travel too much or too little by the amount of the backlash when the direction of movement
is reversed.
You can set the backlash compensation by configuring the parameter 32450[0].
Softkey functions
①
Selects the next axis
②
Selects the previous axis
③
Activates the modified values
④
Resets the value of the selected parameter to default
Setting parameter
No.
Name
32450[0]
BACKLASH
Commissioning Manual
01/2017
Unit
Range
mm
-
mm
-
Unit
Range
mm
-
⑦
Proceeds to the next step
Description
- software limit switch
+ software limit switch
⑤
Cancels the last change to the parameter
⑥
Returns to the last step
⑦
Proceeds to the next step
Description
Backlash compensation is active after reference point ap-
proach.
241