Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 19

Components in the machine control panel (MCP) package
Component Quantity (piec-
es)
MCP 1
MCP connecting 1 (for connect-
cable ing the MCP to
the PPU)
Horizontal
Mounting
•
MCP: 6
clamps with
screws
Vertical
•
MCP: 8
Pre-defined 1
labeling strips
for keys of the
MCP, milling *
Blank strip pa- 1
per, A4 size *
* Not provided in the package for the horizontal MCP with a reserved slot for the handwheel.
Commissioning Manual
01/2017
Illustration
Horizontal MCP, with
override switches
Horizontal MCP, with a
reserved slot for the
handwheel
Vertical MCP, with an
override switch for the
spindle
Vertical MCP, with a
reserved slot for the
handwheel
Article number
6FC5303-0AF35-0AA0 (English)
6FC5303-0AF35-0CA0 (Chinese)
6FC5303-0AF35-1CA0 (Chinese)
6FC5303-0AF35-2AA0 (English)
6FC5303-0AF35-2CA0 (Chinese)
6FC5303-0AF35-3AA0 (English)
6FC5303-0AF35-3CA0 (Chinese)
19