Spare Parts - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

● Access MyMachine
– Access MyMachine (AMM) is a tool that allows the commissioning engineer to exchange files between the computer
and the control very easily through the Ethernet interface. For data transmission, the control can be connected to the
computer directly or via the local network.
● PLC Programming Tool
– PLC Programming Tool makes a connection between the programming tool and the control system. The
commissioning engineer can program and debug the PLC inside the control system.
● Config DATA
– Config_DATA contains the configuration data setup. The setup will install the configuration data for the control system
to your computer. The configuration data consist of the Siemens examples, and the user documents.
2.1.1.6

Spare parts

Connectors for V70 drives
Article number
6SL3200-0WT01-0AA0
Replacement fans for V70 drives
Drive frame size
FSB
FSC
FSD
For more information about fan replacement, see Section "Replacing the fan for the V70 drive (Page 477)".
34
Components
Line supply connector
Motor power/braking
resistor connector (with
a short-circuit stick pre-
assembled)
Holding brake connect-
or
STO/24 V power supply
connector
STO short-circuit stick
Fan components
Illustration
Quantity Illustration
1
1
1
1
1
Article number
6SL3200-0WF00-0AA0
6SL3200-0WF01-0AA0
6SL3200-0WF03-0AA0
Applicable drive variants
V70 feed drive FSA
V70 feed drive
FSA/FSB/FSC
All V70 drives
Commissioning Manual
01/2017