Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 269
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
Commissioning Manual
01/2017
Move the cursor to the input field for Length Z with the cursor keys and then press this soft-
key.
5.
Enter the distance between the tool tip and the workpiece edge in the input field, for exam-
ple, "0". (This value is the thickness of a setting block if it is used.)
If you desire to use the relative coordinate, press this softkey.
6.
Press this softkey to confirm your input. The system calculates the offset and enters it in the
geometry input field of the currently active tool automatically.
7.
Repeat the above steps to finish measuring all the tools.
269
Advertisement
Table of Contents
