Usb Interface - X30 - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

Illustration
Note
Use only shielded twisted pair cables; You must connect the cable shield to the metal or metalized connector casing of the
control system.
4.2.16

USB interface - X30

There is a USB interface on the back of the PPU. This USB interface is used for connecting with the MCP.
Pin assignment
Type USB socket, type A Combicon 4-pin
Cable Type: USB cable (0.5 m)
Illustration Pin
1
2
3
4
Commissioning Manual
01/2017
Pin Signal name
Signal name Signal type
P5_USB0 VO
DM_USB0 I/O
DP_USB0 I/O
M VO
Signal type Comment
Comment
5 V power supply
USB data-
USB data+
Ground
103