Network Functions; Network Configuration - Siemens SINUMERIK 808D ADVANCED Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
10
Network functions
10.1
Network configuration
Ethernet connections
You can establish a network connection between the control system and a computer via the Ethernet interface X130. The
following Ethernet connections are possible:
● Direct connection: connecting the control system directly to a computer
● Network connection: integrating the control system into an existing Ethernet network
Establishing a direct connection
Proceed as follows to establish a direct connection between the control system and a computer:
+
Establishing a network connection
Proceed as follows to establish a network connection:
+
Commissioning Manual
01/2017
1.
Connect the control system with the computer using an Ethernet cable.
2.
Select the desired operating area on the PPU.
3.
Press this key to view the extended softkeys.
4.
Set up a direct connection on the control system through the following softkey operations:
→
The following dialog pops up on the screen:
1.
Connect the control system with the local network using an Ethernet cable.
2.
Select the desired operating area on the PPU.
3.
Press this key to view the extended softkeys.
4.
Enter the main screen of the service control options through the following softkey opera-
tions:
→
5.
Press this softkey to enter the window for the network configuration.
→
251
Advertisement
Table of Contents
