Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 172

Variable Type
ConHw_Key BOOL
SimConHw_Key BOOL
NegDir- BOOL
SimConHw_Key
INCvar_Key BOOL
When the Auxiliary Function Lock function is active, all the outputs caused by auxiliary functions (like T, M, or S code)
1)
are disabled, only with the axis moving as usual.
Outputs
Variable Type
AFL_LED BOOL
ConHw_LED BOOL
SimConHw_LED BOOL
NegDir- BOOL
SimConHw_LED
INCvar_LED BOOL
Relevant PLC machine data
No.
14512 [20].0
14512 [20].2
14510 [12]
Example for calling subroutine 37
172
Description
Define the Contour Handwheel at the MCP key
Define the simulation contour handwheel at the MCP key
Define the negative direction for simulation contour handwheel at the MCP key
Define the INCvar at the MCP key
Description
Define the Auxiliary Function Lock at the MCP LED
Define the Contour Handwheel at the MCP LED
Define the simulation contour handwheel at the MCP LED
Define the negative direction for simulation contour handwheel at the MCP LED
Define the INCvar at the MCP LED
Description
Grey coded switch (0: spindle override controlled by the grey mode; 1: spindle override con-
trolled by trigger user keys)
Activate the first additional axis (0: disable the additional axis control; 1: enable the additional
axis control)
Layout of the traverse keys
For a turning variant, 0: horizontal version; 1: inclined version
•
For a milling variant, 0: vertical milling; 1: knee-type
•
Commissioning Manual
01/2017