7.2
Commissioning the PLC
7.2.1
Setting PLC related parameters
Use either of the following softkeys on the main screen of prototype commissioning wizard to enter the window for setting
the PLC related parameters:
/
Softkey functions
①
Activates the parameter changes. Note that the con-
trol system restarts to accept the new values.
②
Resets the value of the selected parameter to default
For more information about setting the PLC related parameters, see Section "PLC machine data (Page 160)".
Commissioning Manual
01/2017
③
Cancels the last change to the parameter
④
Proceeds to the next step
229