Subroutine 59 (Mm_Mcp_808D) - Siemens SINUMERIK 808D ADVANCED Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
Example for calling subroutine 58
6.6.32
Subroutine 59 (MM_MCP_808D)
Purpose
To use subroutine 59, you must have licensed the optional Manual Machine Plus function for the SINUMERIK 808D
(Turning) or SINUMERIK 808D ADVANCED T (Turning). The subroutines 46, 58 and 59 must be used together. Normally,
the spindle will be stopped after you press the NC reset key. However, when a manual machine is started, you do not want
to stop the spindle after pressing the NC reset key. In this case, call subroutine 59 (MM_MCP_808D) after executing
subroutine 37 (MCP_NCK). Then you do not need to rewrite subroutine 37 (MCP_NCK).
Local variable definition
Inputs
Name
SP_STOP_K
Commissioning Manual
01/2017
Type
BOOL
Description
Spindle stop
197
Advertisement
Table of Contents
