Table of Contents
Advertisement
11
11.1
9/1553-ANF 901 54 Uen L1 2016-03-09
WEB SERVER
From the web browser in your PC, you can access your IP telephone to handle data in
the telephone. The following can be done:
•
Settings, programmable keys: Add, change and delete Dial-by-function key
numbers. Change the type of ring signal for Monitoring keys.
•
Settings, hearing level: select standard or increased.
•
Settings, ring character: selectable between 0-9.
The web address of your telephone has to be entered in the address field in your web
browser, see 11.1 Accessing the Web Interface with the IP Address on page 50.
ACCESSING THE WEB INTERFACE WITH THE IP
ADDRESS
The DBC 420 02 is only intended for use with IP addresses from DHCP. You must get
the IP address and your PIN from the administrator.
In the Web browser on your PC you will see:
Figure 6:
Logging On to the Web Interface
If you fail to access this web page when using an earlier used web address, ask your
administrator for the new web address. If your telephone has been disconnected from
the LAN for a couple of days, this web address might have changed.
The description of the functions in the web interface, see 11.2 Using the Function in the
Web Interface on page 51
W
S
EB
ERVER
50
Advertisement
Table of Contents
