Using Dnd Modes Via The Ip Phone Ui - Mitel 6865i User Manual

MANAGING CALLS
For each account, enable DND by placing a check mark in the box. Disable DND by unchecking the
5.
box.
:
NOTE
If you selected Account or Custom mode in Step 2, you can enable/disable each account or all
a.
accounts as applicable. If you selected Phone mode, the first account allows you to change the
DND status for all accounts.
Number and name of accounts that display to this screen are dependent on the number and
b.
name of accounts configured on the phone. Only your Administrator can create accounts for your
phone. Contact your Administrator for more information.
Click Save Settings.
6.
The changes takes affect immediately without a reboot.

USING DND MODES VIA THE IP PHONE UI

After you add a DND key to your phone, you can toggle the DND state using this key on the phone. Use
the following procedure to enable/disable DND on the IP phone.
The following procedures assume you have already configured a DND key AND assumes there are two
accounts configured on the phone.
:
NOTE
If there is no DND key configured or if it is removed, DND is disabled on the IP phone.
1.
If there is only one account configured on the phone, then the mode setting is ignored and the phone
2.
behaves as if the mode was set to Phone.
Using the Mitel Web UI, if you change the DND key mode to Phone, all accounts synchronize to the
3.
current setting of Account 1.
DND in Account Mode
DND AND CALL FORWARD
131