3Com VCX V7000 Installation Manual page 94

94 C 2: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Secondary Server (continued)
In addition, the password for the previously provided user name is
required. Specify the password to use when accessing the VCX
Authentication & Directory Server.
Password for access to Auth & Dir Server
IP Messaging includes support for Text To Speech (TTS) via one or more
external servers.
Is Text To Speech (TTS) enabled? [N]
Do you wish to change any of the IP Messaging Service parameters? [N] :
--------- Configuring additional parameters for Auth & Dir Service ---------
At a branch office, the password for access to the regional office system's
'cworks' account is required.
system, specify the 'cworks' password for access to *this* system.
IP T
ELEPHONY AND
This cworks password is used for authentication when accessing the
Authentication and Directory server database. This password must be the
same as the cworks database authentication password on the
Authentication and Directory server. It is not necessarily the same as the
password used to log in to the local cworks account.
To use this feature you must answer 'Y' here.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script prompts you for the IP address of up
to four Text-to-Speech Servers. Each server is a PC running the Windows
operating system. If you have entered IP addresses for all of your
Text-to-Speech Servers, press the Enter or Return key for all remaining IP
address prompts. If you enable Text-to-Speech, you must use the G711u
codec (the default), not the G729a codec.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
At a regional office or on a standalone
M S
ESSAGING ERVER
:
: