3Com VCX V7000 Installation Manual page 173

Sample Services Configuration Script — Primary IP Messaging Server (continued)
In a regional office, IP Messaging can be used in two ways.
Messaging configuration, the regional IP Messaging systems are used by the
entire organization including branch offices.
configuration, the regional IP Messaging systems are used only by the
regional office, and branches have their own IP Messaging systems.
regional office that has no branch offices uses Local Messaging.
Is Global Messaging in use? (Y/N) [N]
The SIP default dialing domain is used to construct the SIP URI for
outbound SIP requests.
Enter the SIP default dialing domain
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor
The primary Authentication & Directory Service is principally responsible
for performing authentication, authorization, and certain user-specific
functions
IP address of the primary Auth & Dir Service
Press the Enter or Return key to accept the default answer (N). Single
offices with two servers and regional offices with no branch offices are
configured for Local IP Messaging. That is, all users obtain IP Messaging
services from the local IP Messaging Servers.
You must use the same dialing domain for all servers in a VCX system.
3Com recommends the use of 1.1.1.1 as the dialing domain.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server.
Authentication and Directory Service tasks are associated with the eth0
network interface. Enter the IP address of eth0 on the Primary
Authentication and Directory Server.
In a Global
In a Local Messaging
:
: 1.1.1.1
:
:
:
173
NOTE: A