3Com VCX V7000 Installation Manual page 374

372 A B: A
PPENDIX UTOMATED
TerminationSide_0 = 1
TerminationSide_1 = 0
TerminationSide_2 = 0
TerminationSide_3 = 0
FramingMethod_0 = D
FramingMethod_1 = 0
FramingMethod_2 = 0
FramingMethod_3 = 0
[SS7 Params]
[Voice Engine Params]
IdlePCMPattern = 255
DSPVersionTemplateNumber = 2
VoiceVolume = -6
InputGain = 6
B O I
RANCH FFICE NSTALLATION
Sample V6100 Media Gateway Configuration File
E1_QSIG (Basic call only) — 21
T1_QSIG (Basic call only) — 23
T1_DMS100_Meridian — 35
Selects the framing method to be used for E1/T1 spans.
For E1
0 — Multiframe with CRC4 (default, automatic mode, if CRC is identified
in the Rx, CRC is sent in Tx, otherwise no CRC).
a — Double frame
c — Multiframe with CRC4
For T1
0 or D — Extended super frame with CRC6 (default)
1 or B — Super frame D4, F12 (12-Frame multiframe)
A — F4 (4-Frame multiframe)
C — Extended super frame without CRC6
F — J1 - Japan (ESF with CRC6 and JT)
Specify the PCM Pattern to be applied to E1/T1 timeslot (B-channel) when
the channel is idle. The range is 0x00 to 0xFF. The default = -1 (default
pattern = 0xFF for µ-Law, 0x55 for A-law).