Isc Server; Configuration File; Sample File - 3Com VCX V7000 Installation Manual

386 A B: A B O I
PPENDIX UTOMATED RANCH FFICE NSTALLATION

ISC Server

This section describes how to configure DHCP services on a DHCP server
(dhcpd) from the Internet Systems Consortium. The sample configuration
file contains comments to help you understand the parameters and how
to configure them.
CAUTION: The ISC DHCP server is not provided as part of the VCX system
software and should not be installed on any VCX server.

Configuration File

All DHCP parameters are specified in a file called , typically
dhcpd.conf
located here:
/etc/dhcpd.conf
CAUTION: Verify that the file is located in the same place on
dhcpd.conf
your Linux or UNIX system. Not all systems use the same file locations. To
specify a different location for the file, start the DHCP server
dhcpd.conf
using the option.
-cf

Sample File

The sample file contains branch office configuration information only. The
information in the sample file focuses on what you need to add to your
existing file. Comments within the sample file help you to
dhcpd.conf
determine which parameters must be changed when you copy the
sample section and modify it to add another branch office.