3Com VCX V7000 Installation Manual page 403

To create option 60 and add it to the list of DHCP options:
1 Right click the name of the Windows 2003 server, and in the menu that
appears, click Set Predefined Options.
2 In the Predefined Options and Values window that appears, click Add.
3 In the Option Type window that appears, enter this information:
Table 23 Option 60 Values
Field Description
Name Enter a name of your choice.
Example: 3Com Equipment
Data type In the drop-down list, click String.
Array Enable the array check box.
NOTE: Enabling the array check box allows you to enter multiple
values.
Code 60
Description Enter a description of your choice:
Example: 3Com Phones, Gateways, and Call Processors
4 Click OK.
To create 120 and add it to the list of DHCP options:
1 Right click the name of the Windows 2003 server, and in the menu that
appears, click Set Predefined Options.
2 In the Predefined Options and Values window that appears, click Add.
3 In the Option Type window that appears, enter this information:
Table 24 Option 120 Configuration
Field Description
Name Enter a name of your choice.
Example: 3Com SIP Call Processors
Data type In the drop-down list, click IP Address.
Array Enable the array check box.
NOTE: Enabling the array check box allows you to enter multiple
values.
Code 120
Description Enter a description of your choice:
Example: Primary and Secondary SIP Call Processor IP Addresses
Windows 2003 Server 401