3Com VCX V7000 Installation Manual page 105

Sample Network Configuration Script — Branch Office Server (continued)
Is all of the above information correct? [yes] :
---------------------------------------------------------------------------
End of Sample Network Configuration Script — Branch Office Server
Sample Services Configuration Script — Branch Office Server
----------------------- Select System Configuration -----------------------
Individual systems may provide various services in a VCX installation. You
must select the appropriate set of services which this system is to
provide. Be certain that the selection corresponds to the functionality
you have purchased.
Which services will this system provide?
1. IP Telephony and IP Messaging Services
2. Call Records Service
3. Call Processing Services for IP Telephony
4. Authentication and Directory Services for IP Telephony
5. IP Telephony Services
6. IP Messaging Services
Enter your choice (1-6) :
You have chosen to configure this system to provide:
IP Telephony and IP Messaging Services
Note that in order for these services to work, you must have purchased an
appropriate license and installed the corresponding license activation key
on this system.
*** WARNING ***
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter no.
The script displays several status messages and prompts you to select the
system configuration type for this server.
Enter 1 to configure this branch office server with IP Telephony and IP
Messaging Services. The script asks you to confirm your choice and warns
you that your choice cannot be changed after you confirm it.
Once you confirm your selection, you cannot change it.
105