3Com VCX V7000 Installation Manual page 157

Sample Services Configuration Script — Branch Office IP Telephony Server (continued)
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This server runs IP Telephony services.
separate server.
Please enter the role of this system:
1 - This is a regional office, primary IP Telephony server.
2 - This is a regional office, secondary IP Telephony server.
3 - This is a branch office IP Telephony server.
4 - This server operates standalone.
Enter your choice by number [1] : 3
Services running on this server need to communicate with other servers and
devices in order to operate.
asked for information about these external services and devices, and for
other global parameters.
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation.
consisting of letters and/or numbers.
or tabs may be used.
Enter a unique identifier for this site
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor
Enter 3 to configure this server as a branch office IP Telephony server.
In the next series of questions, you will be
It is a string of up to 22 characters,
Enter a site ID of your choice.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary IP Telephony Server.
IP Messaging is provided on a
No punctuation characters, spaces,
:
:
:
157