3Com VCX V7000 Installation Manual page 215

Sample Services Configuration Script — IP Messaging Client (continued)
-------- Configuring additional parameters for IP Messaging Service --------
How many voice ports does this IP Messaging System have?
Number of VoIP ports
IP Messaging includes support for Text To Speech (TTS) via one or more
external servers.
Is Text To Speech (TTS) enabled? [N]
Do you wish to change any of the IP Messaging Service parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String
Press the Enter or Return key to accept the default value (120).
To use this feature you must answer 'Y' here.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script prompts you for the IP address of up
to four Text-to-Speech Servers. Each server is a PC running the Windows
operating system. If you have entered IP addresses for all of your
Text-to-Speech Servers, press the Enter or Return key for all remaining IP
address prompts. If you enable Text-to-Speech, you must use the G711u
codec (the default), not the G729a codec.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
: 120
:
:
: private
215