3Com VCX V7000 Installation Manual page 385

Ip telephony solution
Hide thumbs Also See for VCX V7000:
Table of Contents

Advertisement

PROXYIP = 10.230.189.23
TRUNKGROUPSETTINGS = 1,1
TRUNKGROUPSETTINGS = 2,0
TXDTMFOPTION = 4
;TelProfile: ProfileName, Preference, CodersGroupID, IsFaxUsed, DJBufMinDelay,
JBufOptFactor, IPDiffServ, SigIPDiffServ, DtmfVolume, InputGain, VoiceVolume,
EnableReversePolarity, EnableCurrentDisconnect, EnableDigitDelivery, ECE,
MWIAnalog, MWIDisplay, FlashHookPeriod, EnableEarlyMedia, ProgressIndicator2IP
TELPROFILE_1 = Default Tel Profile,1,0,1,70,7,46,46,-11,0,-5,0,0,0,1,1,1,400,1,0
Sample V6100 Media Gateway Configuration File
Enter the IP address of the primary SIP proxy. If you want to specify the IP
address of an alternate SIP proxy, enter a second PROXYIP line.
Enable (4) or disable (0, default) to enable the Media Gateway to
negotiate the RFC 2833 payload type between the local and remote sites
using Session Description Protocol (SDP).
This is a comment line that identifies the parameters used in the next line.
The INI file contains telephone profiles that you configured in the web
browser screens. Up to 4 telephone profiles can be defined. Navigate to
Protocol Management > Profile Definitions > TelProfile Settings.
The parameters are:
Profile Name — A name that helps to distinguish this profile from the
other three profiles.
Preference — A priority (1 through 10) that determines whether to
apply the parameters of the telephone profile or the parameters of an
IP profile to a call (the lower Preference number is used). If the
Preference number of the telephone profile and the IP profile match,
the parameters that are common to both profiles are used for the call.
Coder Group ID — An ID selected from a dropdown list.
IsFaxUsed — Yes or No, selected from a dropdown list.
DJBufMinDelay — A delay, in milliseconds, between 0 (zero) and 150
msec. The default is 70 msec.
DJBufOptFactor — An optimizing factor with values from 0 (zero) to
13. The default is 7. For non-data calls, the maximum value is 12. Set
this value to 13 for data (fax and modem) calls.
Configuration Files
383

Advertisement

Table of Contents
loading

Table of Contents