3Com VCX V7000 Installation Manual page 28

28 C 1: P -I
HAPTER RE
Single Sites
Table 5 Worksheet for Single Sites or Small Regional Offices
Configuration Parameter
Configuration Type (circle one) :
Primary Server
Host Name (see "Host Names"
Site ID
Site Description
System Configuration (circle one):
IP Address (eth0)
Subnetwork Mask
Default Gateway IP Addresses
IP Address (eth1)
Subnetwork Mask
Default Gateway IP Addresses
G
NSTALLATION UIDELINES
The two possible single-site configurations are:
Single pair (2 servers) — Primary and secondary servers both run the IP
■
Telephony and Messaging configuration. The Call Records Service is
enabled only on the primary server.
Two pairs (4 servers) — One pair runs the IP Telephony configuration
■
and one pair runs the IP Messaging configuration. The Call Records
Service is enabled only on the primary server of the pair running the IP
Telephony configuration.
Print one worksheet for each pair. Not every field is required. Space is
alloted for all fields regardless.
on page 23 for more information)
Value for Your Site
Single Pair Two Pairs
Single Pair, IP Telephony & Messaging
Single Pair, Call Records Service
One of two pairs, IP Telephony
One of two pairs, Call Records Service
One of two pairs, IP Messaging