3Com VCX V7000 Installation Manual page 127

Sample Services Configuration Script — Primary IP Telephony Server (continued)
IP address of the primary IP Messaging Service
The secondary IP Messaging Service is a backup for voice mail and other
messaging services.
IP address of the secondary IP Messaging Service
The primary Media Gateway acts as the interface between the VCX IP
Telephony system and the external telephone network.
IP address of the primary Media Gateway
The secondary Media Gateway is an additional interface between the VCX IP
Telephony system and the external telephone network.
secondary Media Gateway, leave this entry blank.
IP address of the secondary Media Gateway
The Call Records Service consolidates call accounting records for the VCX
system. It is only enabled on one server for an entire installation.
Enable the Call Records Service (Y/N)? [N]
IP Messaging tasks are associated with the eth0 network interface. Enter
the IP address of eth0 on the Primary IP Messaging Server.
IP Messaging tasks are associated with the eth0 network interface. Enter
the IP address of eth0 on the Secondary IP Messaging Server.
Enter the IP address of the analog or digital media gateway that this VCX
server will use as the primary way of connecting to the Public Switched
Telephone Network (PSTN).
Enter the IP address of the analog or digital media gateway that this VCX
server will use as the secondary way of connecting to the Public Switched
Telephone Network (PSTN).
In order to generate call history reports or billing records, the VCX system
must collect and save call records. These records are then used by a
program such as Call Data Reporting (CDR) to generate reports. The Call
Records Service gathers the records. This server is the Primary IP
Telephony Server at a single site. Enter Y to enable the Call Records
service.
The script prints a summary of the global parameters that you have
entered.
:
:
:
If there is no
:
:
127