3Com VCX V7000 Installation Manual page 225

Sample Services Configuration Script — Primary Call Processing Server (continued)
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This server runs Call Processing services for IP Telephony.
and Authentication & Directory services are provided on separate servers.
Please enter the role of this system:
1 - This is a regional office, primary Call Processing server.
2 - This is a regional office, secondary Call Processing server.
3 - This server operates standalone.
Enter your choice by number [1] : 1
Services running on this server need to communicate with other servers and
devices in order to operate.
asked for information about these external services and devices, and for
other global parameters.
The site ID is a unique value which identifies a particular site in a
multi-site VCX installation.
consisting of letters and/or numbers.
or tabs may be used.
Enter a unique identifier for this site
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor
Press the Enter or Return key to accept the suggested answer (Y).
Enter 1 to configure this server as the primary server.
In the next series of questions, you will be
It is a string of up to 22 characters,
Enter a site ID of your choice.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server.
No punctuation characters, spaces,
:
IP Messaging
:
:
225