Downloading Language Prompts; Downloading To The Primary Ip Messaging Server - 3Com VCX V7000 Installation Manual

Downloading
Language Prompts
Downloading to the
Primary IP Messaging
Server
To assign a set of language prompts to any IPMSG mailbox, use your
browser to log in to the VCX Administrator Interface and follow the
instructions in the VCX Administration Guide.
To install a set of language prompts if the prompts package is not on your
system, follow the steps in this section.
The Primary IP Messaging Server may be any of these:
A regional office server that runs IP Messaging services only
■
A regional office server that runs IP Messaging and IP Telephony
■
services
A server at a single site that runs IP Messaging and IP Telephony
■
services
A branch office server that runs IP Messaging and IP Telephony
■
services
1 Log in as root on the Primary IP Messaging Server. The default password is
pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
2 Log in to the 3Com Partner Access web site and locate the prompt file.
3 Download the language RPM file and place it in this directory:
/opt/installtemp
Example: The file that contains the UK English prompts and is compatible
with a G711 codec is IPMSG-UK-EN-G711u-SPEAK-1-1.i386.rpm. This file
name is used in the remaining steps of this procedure. Select the file
name that applies to the language and codec that you want. The version
numbers within the file (-1-1 in this example) will change over time.
4 Enter these commands:
cd /opt/installtemp
vcx-install IPMSG-UK-EN-G711u-SPEAK-1-1.i386.rpm
5 Follow the instructions in
System" earlier in this chapter to install the prompts.

Downloading Language Prompts

"Language Prompts Already on Your VCX
281