3Com VCX V7000 Installation Manual page 150

150 C 3: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Secondary IP Telephony Server (continued)
Enable management station authentication? [N]
Do you wish to change any of the Common Agent parameters? [N] :
----------------------------------------------------------------------------
Initial VCX configuration is now complete.
entered is saved, you have the option of reviewing and changing parameters
for each VCX service at a detailed level.
and is recommended only for advanced users.
Do you wish to review service parameters in detail? [N] :
----------------------------------------------------------------------------
Please wait while the wizard completes.
End of Sample Services Configuration Script — Secondary IP Telephony Server
IP T S
ELEPHONY ERVER
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script enters a mode in which you can
review and modify low-level configuration parameters for each service.
This is not needed for standard configurations and using it successfully
requires substantial VCX configuration expertise. 3Com does not support
this mode of making configuration changes.
The script now saves all of the configuration parameters, displays several
status messages, and exits.
:
Before the information just
This is not needed in most cases