3Com VCX V7000 Installation Manual page 371

TDMBusClockSource = 4
EnableLANWatchdog = 1
MIIRedundancyEnable = 1
RoutingTableHopsCountColumn = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0
[ATM Params]
[Analog Params]
LifeLineType = 2
FXSLoopCharacteristicsFilename = 'COEFFICIENT_M1K_FXS.dat'
FXOLoopCharacteristicsFilename = 'COEFFICIENT_M1K_FXO.dat'
FarEndDisconnectSilenceMethod = 0
Sample V6100 Media Gateway Configuration File
Specify the TDM Bus Clock Source. The gateway can either generate its
own timing signals, using an internal clock, or recover the signals from
one of the E1/T1 trunks.
1 — Generate clock from local source (default).
■
4 — Recover clock from PSTN line.
■
Set this value to 1 to enable the Media Gateway to restart when a LAN
failure is detected.
Set this parameter to 2 to activate the lifeline under any of these
conditions:
The media gateway loses power
■
The network link is physically disconnected
■
The network link fails for any reason
■
These parameters hold the names of the characteristics files for the FXS
and FXO analog gateways. Do not modify these values.
Specify the method by which the Media Gateway detects silence during a
call. Silence is detected based on these values:
0 — Disabled. This is the default setting.
■
1 — Based on a specified number of silence packets that have been
■
transmitted or received.
Configuration Files 369