3Com VCX V7000 Installation Manual page 339

--------------------------- Preparing to Create ---------------------------
VCX version
New configuration file
VSBOM file (config type) : VSBOM-all.xml
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This server runs IP Telephony and IP Messaging services.
Please enter the role of this system:
1 - This is a regional office, primary IP Telephony & Messaging server.
2 - This is a regional office, secondary IP Telephony & Messaging server.
3 - This is a branch office IP Telephony & Messaging server.
4 - This server operates standalone.
Enter your choice by number [1] :
Services running on this system need to communicate with other systems and
devices in order to operate.
asked for information about these, and for other global parameters.
VCX systems can have one or two IP addresses. If the system has or will use
only a single Ethernet interface, enter its IP address here.
has two Ethernet interfaces and both will be used, enter the IP address of
the first one here.
Sample vcx-createcfg Script (continued)
The script prints a confirmation of the parameters that you have selected.
: VCX.7.1.1a
: region04
Press the Enter or Return key to accept the default answer (Y). The script
presents information and choices that are appropriate for the target
server, not the server on which the script is running.
3
This sample script creates a configuration file for a branch office IP
Telephony Server.
In the next series of questions, you will be
Configuration Files
:
If the system
337