3Com VCX V7000 Installation Manual page 248

248 C 6: I
HAPTER NSTALLING A
Sample Services Configuration Script — Call Records Server (continued)
You have chosen to configure this system to provide:
Call Records Service
Note that in order for these services to work, you must have purchased an
appropriate license and installed the corresponding license activation key
on this system.
*** WARNING ***
Are you absolutely certain that you wish to configure this system as an
'Call Records Service' server?If you answer 'no' here you can choose an
alternative configuration.
Confirm selection? [no] : yes
Selection confirmed.
----------------------------------------------------------------------------
------------- Welcome to the VCX Service Configuration Wizard --------------
----------------------------------------------------------------------------
This wizard sets up VCX services.
Do you wish to configure services at this time? [Y]
------------------------- Configuring VCX Services -------------------------
This server runs the Call Records Service.
Services running on this server need to communicate with other servers and
devices in order to operate.
asked for information about these external services and devices, and for
other global parameters.
The Call Records Service consolidates call accounting records for the VCX
system. It is only enabled on one server for an entire installation.
C R S
ALL ECORDS ERVER
Enter 2 to configure this server for Call Records Services. The script warns
you that the choice cannot be reversed and gives you the opportunity to
change your choice.
Once you confirm your selection, you cannot change it.
Enter yes to confirm your choice.
The script prints several configuration messages.
Press the Enter or Return key to accept the suggested answer (Y).
In the next series of questions, you will be
: