3Com VCX V7000 Installation Manual page 198

198 C 4: I
HAPTER NSTALLING AN
Sample Network Configuration Script — Branch Office IP Messaging Server (continued)
Is all of the above information correct? [yes] :
---------------------------------------------------------------------------
End of Sample Network Configuration Script — Branch Office IP Messaging Server
Sample Services Configuration Script — Branch Office IP Messaging Server
----------------------- Select System Configuration -----------------------
Individual systems may provide various services in a VCX installation.You
must select the appropriate set of services which this system is to
provide. Be certain that the selection corresponds to the functionality
you have purchased.
Which services will this system provide?
1. IP Telephony and IP Messaging Services
2. Call Records Service
3. Call Processing Services for IP Telephony
4. Authentication and Directory Services for IP Telephony
5. IP Telephony Services
6. IP Messaging Services
Enter your choice (1-6) : 6
You have chosen to configure this system to provide:
IP Messaging Services
Note that in order for these services to work, you must have purchased an
appropriate license and installed the corresponding license activation key
on this system.
*** WARNING ***
IP M S
ESSAGING ERVER
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter no.
The script displays several status messages and prompts you to select the
system configuration type for this server.
Enter 6 to configure this server for IP Messaging Services. The script
warns you that the choice cannot be reversed and gives you the
opportunity to change your choice.
Once you confirm your selection, you cannot change it.