3Com VCX V7000 Installation Manual page 132

132 C 3: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Primary IP Telephony Server (continued)
---------- Configuring additional parameters for Call Processor -----------
Trusted Endpoints are allowed to send SIP Notify messages to the Call
Processor. Certain Trusted Endpoints are configured automatically.
Additional Trusted Endpoints can be entered here.
indicate that all endpoints have been entered.
Additional Trusted Endpoint IP address
TrustedAddress
Additional Trusted Endpoint IP address
TrustedAddress
Do you wish to change any of the Call Processor parameters? [N] :
--------- Configuring additional parameters for Auth & Dir Service ---------
At a branch office, the password for access to the regional office system's
'cworks' account is required.
system, specify the 'cworks' password for access to *this* system.
Login Password
Login Password (confirm)
IP T S
ELEPHONY ERVER
Enter the IP address of any server or device that you want to be included
in the list of trusted endpoints. To stop entering trusted endpoints, press
the Enter or Return key when prompted for another entry.
Press the Enter or Return key to accept the default answer (N). If you
want to change any of the values, enter Y.
At a regional office or on a standalone
This cworks password is used for authentication when replicating this
server's database on a remote Authentication and Directory server. This
password must be the same as the cworks account password on the
remote server. It is not necessarily the same as the password used to log
in to the local cworks account configured earlier in this script.
Enter a blank input to
:
:
: ******
: ******