3Com VCX V7000 Installation Manual page 345

Enable UPS monitoring? [N]
----------- Configuring additional parameters for Call Processor -----------
Trusted Endpoints are allowed to send SIP Notify messages to the Call
Processor. Certain Trusted Endpoints are configured automatically.
Additional Trusted Endpoints can be entered here.
indicate that all endpoints have been entered.
Additional Trusted Endpoint IP address
TrustedAddress
Do you wish to change any of the Call Processor parameters? [N] :
-------- Configuring additional parameters for IP Messaging Service --------
When multiple IP Messaging systems are in use, for example at a region and
one or more branches, the Global Voicemail capability allows these systems
to act as a single unified voicemail system.
participates in Global Voicemail.
Is Global Voicemail enabled? [N]
IP Messaging includes an optional ability to archive messages to an
external server.
Sample vcx-createcfg Script (continued)
Press the Enter or Return key to accept the default answer (N). You can
deploy a UPS in either a branch office or regional configuration. For the
current VCX software release, 3Com Corporation supports UPS hardware
from American Power Conversion (APC) Corporation. (For a list of
supported APC UPS devices, consult with your 3Com Service
Representative or your 3Com Voice Authorized Reseller.) If you answer Y
to this question, the script prompts you with further questions about your
UPS configuration.For an example of these questions, see
Primary IP Telephony Server (Single Site)"
Enter the IP address of any SIP devices or servers that you want the VCX
Call Processing Servers to treat as trusted endpoints. When you have
finished, press the Enter or Return key when prompted for another IP
address.
Press the Enter or Return key to accept the default answer (N), or enter Y
to change one or more of the values.
Press the Enter or Return key to accept the default answer (Y) if you want
to use Global Voicemail.
:
in Chapter
Enter a blank input to
:
Say 'yes' here if this system
:
Configuration Files 343
"Configuring a
3.