3Com VCX V7000 Installation Manual page 76

76 C 2: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Primary Server (continued)
In addition, the password for the previously provided user name is
required. Specify the password to use when accessing the VCX
Authentication & Directory Server.
Password for access to Auth & Dir Server
IP Messaging includes support for Text To Speech (TTS) via one or more
external servers.
Is Text To Speech (TTS) enabled? [N]
--------- Configuring additional parameters for Auth & Dir Service ---------
At a branch office, the password for access to the regional office system's
'cworks' account is required.
system, specify the 'cworks' password for access to *this* system.
Login Password
Login Password (confirm)
IP T
ELEPHONY AND
This cworks password is used for authentication when accessing the
Authentication and Directory server database. This password must be the
same as the cworks database authentication password on the
Authentication and Directory server. It is not necessarily the same as the
password used to log in to the local cworks account.
To use this feature you must answer 'Y' here.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script prompts you for the IP address of up
to four Text-to-Speech Servers. Each server is a PC running the Windows
operating system. If you have entered IP addresses for all of your
Text-to-Speech Servers, press the Enter or Return key for all remaining IP
address prompts. If you enable Text-to-Speech, you must use the G711u
codec (the default), not the G729a codec.Do you wish to change any of
the IP Messaging Service parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
At a regional office or on a standalone
This cworks password is used for authentication when replicating this
server's database on a remote Authentication and Directory server. This
password must be the same as the cworks account password on the
remote server. It is not necessarily the same as the password used to log
in to the local cworks account configured earlier in this script.
M S
ESSAGING ERVER
: cworks
:
: ******
: ******