Downloading To The Secondary Ip Messaging Server - 3Com VCX V7000 Installation Manual

282 C 8: I
HAPTER NSTALLING
Downloading to the
Secondary IP
Messaging Server
L P
ANGUAGE ROMPTS
To assign a set of language prompts to any IPMSG mailbox, use your
browser to log in to the VCX Administrator Interface, and then follow the
instructions in the VCX Administration Guide.
CAUTION: You must install the same version of any prompt package on
the Primary and Secondary IP Messaging Servers. Installing different
versions causes problems.
The Secondary IP Messaging Server may be any of these:
A regional office server that runs IP Messaging services only
■
A regional office server that runs IP Messaging and IP Telephony
■
services
A server at a single site that runs IP Messaging services
■
A server at a single site that runs IP Messaging and IP Telephony
■
services
A branch office server that runs IP Messaging and IP Telephony
■
services
1 Log in as root on the Secondary IP Messaging Server. The default
password is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
2 Log in to the 3Com Partner Access web site and locate the prompt file.
3 Download the language RPM file and place it in this directory:
/opt/installtemp
Example: The file that contains the UK English prompts and is compatible
with a G711 codec is IPMSG-UK-EN-G711u-SPEAK-1-1.i386.rpm. This file
name is used in the remaining steps of this procedure. Select the file
name that applies to the language and codec that you want. The version
numbers within the file (-1-1 in this example) will change over time.
4 Enter these commands:
cd /opt/installtemp
vcx-install IPMSG-UK-EN-G711u-SPEAK-1-1.i386.rpm