3Com VCX V7000 Installation Manual page 133

Sample Services Configuration Script — Primary IP Telephony Server (continued)
VCX Authentication & Directory Services can provide support for System
Speed Dials. This feature must be enabled only at a single site, and if
replication is in use, the setting must be the same on the primary and
secondary servers for that site.
Enable System Speed Dial Master? [N]
Do you wish to change any of the Auth & Dir Service parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String
In some cases it may be desirable for SNMP Traps to be sent to multiple
destinations. Additional Trap Destinations can be entered here.
blank input to indicate that all destinations have been entered.
IP Address of the first additional trap destination for this system.
Trap Destination
At a single site, enter Y for the primary server and remember to answer Y
when you configure the associated secondary server.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.
If desired, enter the IP address of an additional PC or other system on
which you are running your network management software (for example,
EMS).
:
:
: public
Enter a
:
133