3Com VCX V7000 Installation Manual page 187

Sample Services Configuration Script — Secondary IP Messaging Server (continued)
Enter a unique identifier for this site
The Customer Name identifies the company using this VCX system.
Enter the customer name
Some VCX applications can use European date ordering.
enable this.
Use European date order? (Y/N) [N]
In a regional office, IP Messaging can be used in two ways.
Messaging configuration, the regional IP Messaging systems are used by the
entire organization including branch offices.
configuration, the regional IP Messaging systems are used only by the
regional office, and branches have their own IP Messaging systems.
regional office that has no branch offices uses Local Messaging.
Is Global Messaging in use? (Y/N) [N]
The SIP default dialing domain is used to construct the SIP URI for
outbound SIP requests.
Enter the SIP default dialing domain
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor
Enter a site ID of your choice.
Enter the name of your company.
Press the Enter or Return key to accept the default answer (N). If you
want to display dates using the European order, enter Y.
Press the Enter or Return key to accept the default answer (N). Single
offices with two servers and regional offices with no branch offices are
configured for Local IP Messaging. That is, all users obtain IP Messaging
services from the local IP Messaging Servers.
You must use the same dialing domain for all servers in a VCX system.
3Com recommends the use of 1.1.1.1 as the dialing domain.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
:
:
Answer 'Y' here to
:
In a Global
In a Local Messaging
:
: 1.1.1.1
:
187
NOTE: A