3Com VCX V7000 Installation Manual page 387

ENABLECALLERID_0 = 1
Sample V6100 Media Gateway Configuration File
FlashHookPeriod — Set this parameter to a value between 300 and
■
1500 msec to control:
The detection of a hook flash on a telephone connected to an FXS
■
port
The generation of a hook flash on an FXO port. Note that you must
■
add 90 msec to this number to generate a hook flash of the
desired duration. For example, to generate a hook flash of 450
msec, set this value to 540 msec.
EnableEarlyMedia — Enable (1) or disable (0, default) the ability of the
■
Media Gateway to send a 183 Progress response with the SDP,
allowing a media stream to be set up prior to the time that the call is
answered. If this feature is disabled, the call rings immediately.
ProgressIndicator2IP — Select the type of progress indicator that you
■
want the gateway to send. Depending on the value of
EnableEarlyMedia, the gateway should send one of these progress
indicators. Possible values are:
0 — The gateway sends "180 Ringing" for calls placed to FXS
■
endpoints or to a PBX over an FXO line.
1 — The gateway sends "183 Session in Progress" if the
■
EnableEarlyMedia parameter is enabled (set to 1).
8 — Same as 1.
■
-1 — Not configured. Default values are used.
■
For module 0, disable (0) or enable (1) the Caller ID feature.
End of Sample Media Gateway Configuration File
Configuration Files 385