3Com VCX V7000 Installation Manual page 437

in this section. If the replacement disk is installed on a Primary or
Secondary IP Telephony Server, see
Service" next.
Restoring an IP Telephony Server to Service
Follow the instructions in this section to complete the disk replacement
on a Primary or Secondary IP Telephony Server.
1 Stop all VCX processes on the down server.
a On the down server, log in as root. The default password for the root
account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
b Enter these commands:
cd /etc/init.d
./vcx stop
2 Stop all VCX processes on the running server.
a On the running server, log in as root
b Enter these commands:
cd /etc/init.d
./vcx stop
3 Update the Oracle database on the down server.
a On the running server, log in as cworks.
b Enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./dropReplication
c Enter the site ID.
d Back up the Oracle database on the running server.
For instructions on how to back up the Oracle database, see the VCX
Administration Guide.
e Transfer the Oracle database backup files from the running server to
the down server. See the VCX Administration Guide for instructions.
CAUTION: When you use the scp command to copy the database
backup files to the down server, you may see a warning message about a
Replacing a Disk (Single Site)
"Restoring an IP Telephony Server to
435