3Com VCX V7000 Installation Manual page 381

SENDINVITETOPROXY = 1
MWISERVERIP = '0.0.0.0'
ASSERTEDIDMODE = 1
MWIANALOGLAMP = 1
MWIDISPLAY = 1
ENABLEMWI = 1
USEGATEWAYNAMEFOROPTIONS = 1
ADDTON2RPI = 0
Sample V6100 Media Gateway Configuration File
Enable (1) or disable (0) the sending of INVITE messages (that are
associated with Transfer or Redirect actions) to the proxy, rather than
directly to the URL. This feature cannot be used unless a SIP Proxy is used
and the parameter "AlwaysSendtoProxy" is disabled (0).
Specify the IP address of a Message Waiting Indicator (MWI) server. For
VCX systems, specify the IP address of the primary IP Messaging Server.
Specify one of these modes for sending Caller ID information in an INVITE
message:
0 — No Caller ID information is sent (default).
1 — P-Asserted header includes Caller ID. P-Asserted headers are used
among trusted SIP entities.
2 — P-Preferred header includes Caller ID. P-Preferred headers are used
from a user agent to a trusted proxy.
For FXS modules only, enable (1) or disable (0, default) sending a voltage
to a connected analog telephone to activate the telephone's Message
Waiting Indicator lamp.
Enable (1) or disable (0, default) sending Message Waiting Indicator
information (MWI FSK Message) to the display of a telephone.
Enable (1) or disable (0, default) the Message Waiting Indicator feature.
NOTE: The Media Gateway can receive MWI information but not send it.
Enable (1) or disable (0, default) the use of the Media Gateway's IP
address in keep-alive OPTIONS messages.
Enable (1, default) or disable (0) the addition of Number Plan and Type to
Remote Party ID Header.
Configuration Files 379