3Com VCX V7000 Installation Manual page 357

Sample V6000 Media Gateway Configuration File (continued)
EnableStandardSIDPayloadType = 1
[WEB Params]
UseRProductName = '3Com-VCX-6000'
LogoFileName = '3Com_Logo.gif'
LogoWidth = '96'
WebLogoText = '3Com'
UseProductName = 1
[SIP Params]
ENABLECALLERID = 1
MAXDIGITS = 30
ENABLECALLWAITING = 1
Set this value to determine whether G.711 SID packets are sent using a
proprietary method or according to RFC 3389. Possible values are:
0 — Use proprietary method
■
1 — Use RFC 3389 method
■
This string of characters is sent by the V6000 during DHCP requests.
This file contains the 3Com logo for display on web browser screens.
This parameter specifies the display width for the 3Com logo on web
browser screens.
This string appears when you hover the cursor over the 3Com logo in a
web browser screen.
This parameter controls whether the default product name is used.
Possible values are:
0 — Use the default product name string
■
1 — Use the string specified in UseRProductName
■
Disable (0, default) or enable (1) caller ID information to be passed to
analog telephones (FXS connections) or to the telephone company
equipment (FXO connections).
Specify the maximum number of digits that a user can dial. Possible
values are 1 through 49.
Enable (1) or Disable (0) call waiting for FXS ports.
Configuration Files 355