CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.3.3.11 Home > Modem > Overhead
Open the scrollable Overhead page from the Modem submenu. This page contains the following
options:
Hot
Dialog Window
Key
A
IDR Tx ESC Type
B
IDR Rx ESC Type
C
Tx Audio Volume Port 1
D
Tx Audio Volume Port 2
E
Rx Audio Volume Port 1
F
Rx Audio Volume Port 2
G
High Rate ESC
H
High Rate ESC Parameters
Option Entry
Typical for either entry – Use the ↑↓ arrow keys to select 64k Data
Channel or 2 Audio Channels
Typical for each entry – Use the ↑↓ arrow keys to select:
•
•
Negative6
Negative4
•
•
Positive2
Positive4
Use the ↑↓ arrow keys to select Disabled or Enabled
See Sect. 6.2.1.10.6 CONFIG: Misc HiRateESC in
Chapter 6. FRONT PANEL OPERATION for details
9–38
MN-CDM625A
Revision 4
•
•
Negative2
Zero
•
•
Positive6
Positive8
Need help?
Do you have a question about the CDM-625A and is the answer not in the manual?
Questions and answers