Comtech EF Data CDM-625A Installation And Operation Manual page 117

CDM-625A Advanced Satellite Modem
Updating Firmware
Reboot the CDM-625A. You may perform a 'soft reboot' or a 'hard reboot' as follows:
7)
•
Using the CDM-625A HTTP Interface 'Admin| Reboot' page, click [Reboot Now]. Both
the web page and the modem front panel will display "Rebooting, Please
wait..."
•
From CDM-625A rear panel, turn off or otherwise disconnect, and then turn
on/reconnect the power source to execute reboot of the modem.
The system reboot is complete once the modem front panel displays the top-level "splash"
screen:
Comtech CDM625A Advanced Satellite Modem
PktP, VFEC-2 present
You will need to log in to a new Web session at this time. The CDM-625A HTTP Interface
'Home' page will serve to verify that the new firmware version is active, as shown in this
example:
The CDM-625A is now operating with its latest firmware. The firmware update process is now
complete.
Ver1.4.1
4–13
MN-CDM625A
Revision 4