Config: Ip  Snmp; Snmp Communities - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
6.2.1.13.2 CONFIG: IP  SNMP
SNMP:
Use the ◄ ► arrow keys to select Communities or Traps. Press ENTER.
CONFIG: IP  SNMP  Communities

SNMP Communities:

Use the ◄ ► arrow keys to select Read or Write. Press ENTER.
CONFIG: IP  SNMP  Communities  Read
SNMP Read Community:
Public
Edit the SNMP Read Community string by using the
use the arrow keys to change that character, and press ENTER.
▲▼
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available, except for the backslash (ASCII code 92) and tilde ~
(ASCII code 126). Press ENTER after composing the string. All trailing spaces are removed from
the string upon entry.
CONFIG: IP  SNMP  Communities  Write
SNMP Write Community:
Private
Edit the SNMP Write Community string by using the
arrow keys to change that character, and press ENTER.
use the ▲▼
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available except for the backslash (ASCII code 92) and tilde ~
(ASCII code 126). Press ENTER after composing the string. All trailing spaces are removed from
the string upon entry.
Communities
Read Write
Traps
(20 chars)
◄ ► arrow keys to select a character. Then,
(20 chars)
◄ ►
arrow keys to select a character. Then,
6–56
MN-CDM625A
Revision 4
()
()
()
()