CDM-625A Advanced Satellite Modem
Front Panel Operation
Each display is limited to eight channels. The '>' character displays at the top line, right-hand
side of the Drop or Insert screen to indicate that there are channels beyond Channel 8 available
for selection, up to Channel 31 (as shown by the preceding examples ). Use the
as necessary to scroll between these nested selections.
Once you select a channel, use the
from na to 31, for that channel. Press ENTER.
CONFIG: Quad D&I (QDI) Sync/Asynch Clock Mode
E1 Clock Sync/Asynch Mode:
Synchronous
arrow keys to select the operation as Synchronous or Asynchronous. Press ENTER.
Use the
▲▼
arrow keys on the bottom line to select a timeslot value,
▲▼
(Sync/Asynch)
6–38
MN-CDM625A
Revision 4
◄ ►
arrow keys
()
Need help?
Do you have a question about the CDM-625A and is the answer not in the manual?
Questions and answers