Table of Contents
Advertisement
CDM-625A Advanced Satellite Modem
Front Panel Operation
6.2.6.7
Utilities: Firmware
THESE MENUS ARE FOR DIAGNOSTIC PURPOSES. ONLY CHANGE AN IMAGE IF
INSTRUCTED TO DO SO BY A COMTECH EF DATA PRODUCT SUPPORT TECHNICIAN.
Firmware Images:
Base-Modem
Use the
◄ ►
arrow keys to select Base-Modem or Packet-Processor. Press ENTER.
6.2.6.7.1
Utilities: Firmware Base-Modem
Firmware Information:
Boot-ROM
Use these submenus to view information about the CDM-625A Base Modem internal firmware.
This screen identifies the firmware image that is loaded on startup or reboot of the Base Modem
with an asterisk (*). Use the
Press ENTER.
6.2.6.7.1.1
Utilities: Firmware Base-Modem Boot-ROM, Image#X
Bootrom:
The example shown here is for the Bootrom firmware opening screen. Typical for the Image#1
or Image#2 screens, you may use the
constituent firmware blocks that make up the bulk.
This read-only information is provided for: firmware type; its number (where 'X' is the revision
letter); its build date (in day/month/year format); and its version number (e.g., 1.2.4). Press
ENTER or CLEAR to return to the previous menu.
6.2.6.7.1.2
Utilities: Firmware Base-Modem Select
Current Active Image is #1
Next Reboot, will use Image: #1
The modem can store two complete firmware images. Use this menu to select which image is
loaded the next time the unit reboots. The top line shows the current active image while, on the
bottom line, you may use the
modem will then prompt you to reboot the unit so that the newly-selected image can be loaded
upon startup.
Packet-Processor
Image#1* Image#2
◄ ►
arrow keys to select Boot-Rom, Image#1, Image#2, or Select.
FW/12865X
arrow keys to select the other image. Press ENTER – the
▲▼
Select
DD/MM/YY
#.#.#
arrow keys to scroll through information for all the
▲▼
6–97
MN-CDM625A
Revision 4
()
()
()
Advertisement
Chapters
Table of Contents
