Ethernet Parameters - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Serial-based Remote Product Management
8.5.10

Ethernet Parameters

Command
Number of
Parameter (Instruction
Arguments
& Qualifier)
Ethernet Control SEC= 31 bytes
Actual N/A None
Negotiated Port
Speed
Ethernet Global EGC= Up to 347
Configuration bytes
Command or Query.
Sets or returns Ethernet control in the form 1abbbbc;2abbbbc;3abbbbc;4abbbbc, where:
1, 2, 3, 4 is port number.
a=Reserved, default to 1.
bbbb=Reserved, default to 0001.
c=port speed:
0=Auto
1=100 Full
2=100 Half
3=10 Full
4=10 Half
Query only.
Returns the actual negotiated port sepped in the form abcd, where:
a=port 1 negotiated port speed.
b=port 2 negotiated port speed.
c=port 3 negotiated port speed.
d=port 4 negotiated port speed.
a, b, c, d have the following values:
0=Link down
1=100 Full
2=100 Half
3=10 Full
4=10 Half
Command or Query.
Sets or returns Global Configuration of CDM-625A Ethernet, in the form shown in the Response to Query column, where:
1abccccdxxx;2abccccdxxx;3abccccdxxx;4abccccdxxx=Switch Ports configuration
D=VLAN Mode Enable
E=Switch MAC Learning
FF=QoS Priority
G=Ethernet 2048 Frame Size
H=Precision Time Protocol Feature
I=Precision Time Protocol Mode
J= Precision Time Protocol Transport Mode
KKK.KKK.KKK.KKK= PTP Unicast Master
LL= Precision Time Protocol Unicast Sync Interval
M= SNTP Enable
NNN.NNN.NNN.NNN= SNTP Primary Server
OOO.OOO.OOO.OOO= SNTP Backup Server
PP= SNTP Time Zone
QQQQ=Management VLAN ID
RRRR....=VLAN Table
Description of Arguments
same as SPC
same as SVM
same as SML
same as QOS
same as EFS
same as PTP
same as PTM
same as PTU
same as PTS
same as PTY
same as TPE
same as TPS
same as TPB
same as TPZ
same as SMV
same as SVT
8–62
MN-CDM625A
Revision 4
Query
Response to
(Instruction & Response to Query
Command
Qualifier)
SEC= SEC? SEC=1abbbbc;2abbb
SEC? bc;3abbbbc;4abbbbc
SEC* (see Description of
SEC# Arguments)
N/A NPS? NPS=abcd
(see Description of
Arguments)
EGC= EGC? EGC=1abccccdxxx;2a
EGC? EGC?n (where bccccdxxx;3abccccdx
EGC* n=0 thru 9. xx;4abccccdxxxDEFF
EGC# Returns the EGC GHIJKKK.KKK.KKKLL
portion of 1 of 10 MNNN.NNN.NNN.NN
stored NOOO.OOO.OOO.O
configurations) OOPPQQQQRRRR...
(see Description of
Arguments)