Comtech EF Data CDM-625A Installation And Operation Manual page 181

CDM-625A Advanced Satellite Modem
Front Panel Operation
CONFIG: IP  SNMP  Traps
Traps:
◄ ► arrow keys to select a parameter. Press ENTER.
Use the
CONFIG: IP  SNMP  Traps  Community
SNMP Traps Community:
Comtech
Edit the SNMP Traps Community string by using the
use the arrow keys to change that character, and press ENTER.
▲▼
Only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and tilde ~ (ASCII code 126). Press ENTER after composing the string. All trailing spaces are
removed from the string upon entry.
CONFIG: IP  SNMP  Traps  Version
SNMP Traps Version:
◄ ►
Use the arrow keys to select SNMP-ver1 or SNMP-ver2. Press ENTER.
CONFIG: IP  SNMP  Traps  Address
Trap IP addr #1:
Edit the SNMP Trap Destination's IP Address by using the
use the arrow keys to change that digit, and press ENTER.
▲▼
You may disable SNMP Traps by setting both Trap IP Addresses as 000.000.000.000.
Community
IP-Addr#1
SNMP-ver1 (ver1,ver2)
000.000.000.000
Version
IP-Addr#2
(20 chars)
◄ ►
arrow keys to select a character. Then,
◄ ►
arrow keys to select a digit. Then,
6–57
MN-CDM625A
Revision 4
()
()
()
()