Comtech EF Data CDM-625A Installation And Operation Manual page 501

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
ODU: FSK-control  BUC  Advanced-FSK  LPOD (2LPODs
Online/Offline LPOD) Statistics Config
Stats: Logging=Enabled
Averaging=Disabled
arrow keys to select Logging, Interval, Averaging, or Clear-All, and then use the
Use the
▲▼
arrow keys to set that setting:
▲▼
Selection
Logging
Interval
Averaging
Clear-All
Press ENTER when done.
ODU: FSK-control  BUC  Advanced-FSK  LPOD (2LPODs
Online/Offline LPOD)  Statistics  Stored-Statistics
To enable statistics logging, see the LPOD  Statistics: Config menu. As statistics are compiled,
the Stored-Statistics screen appears as shown here:
Reading Stored Stats..... Please Wait
Once the statistics are compiled, the Stored-Statistics screen displays this data as shown here:
Stats001: 000.0C 040.0C 20.45dBm 10.00dB
10/01/10 12:52:08 On On Off 001.0 002.3V
Use the arrow keys to scroll backwards or forwards through the statistics log entries.
▲▼
The top line displays:
•
The statistics log entry number (up to 512 entries may be stored)
•
Operating Temperature
•
Amplifier Temperature
•
Power
Clear-All=No (◄ ►)
Setting
Enabled or Disabled.
The Logging Interval is the period of time over which performance statistics are
measured. Set this interval as 00 to disable the feature (i.e., no logging) or,
otherwise, define the logging interval from 10 through 90 minutes in 10-minute
increments.
Enabled or Disabled.
When prompted, select YES.
10–31
Interval=10 min
MN-CDM625A
Revision 4